Insta360 Pro App live-streaming setting
- Live-streaming
-
- General setting:
- Mode
- Build-in server
- Custom RTMP server
- HDMI output
- Aerial（Aerial mode, if this mode is selected, the camera will save the original video with resolution of 2560x1440 in each film while outputting the 1920x960 HDMI preview screen. It is suitable for the scenes where the video needs to be stored while previewing the image transfer of DJI UAV)
- Content Type：
- 360° Pano
- 360° 3D
- Resolution（live-streaming resolution）
- Bitrate（Live stream rate）
- Live-streaming URL (If it is a custom RTMP streaming address mode, please fill in the streaming address consisting of URL and Key)
- Save origins from six lens（a switch for live-streaming while saving the original videos from the six lenses）
- Save stitch（for live-streaming while the video screen is being saved）
- Mode
- Exposure settings:
- Mode-
- Auto exposure
- Manual exposure
- Isolated exposure of lenses
- EV and white balance may be adjusted in the auto exposure mode
- ISO and Shutter may be adjusted in the manual exposure mode
- EV and white balance may be adjusted in the mode of isolated exposure of lenses
- The exposure parameter may be reset to be the default settings.
- Mode-
- Property settings:
- Brightness
- Saturation
- Sharpness
- Constrast
- The property parameters may be reset to be the default settings.
- Parameter range：
- EV range：-5 to 5 for normal mode
- ISO range：100 to 6400
- Shutter range：1/30s to 1/8000s for Normal Shutter
- WB Levels：Auto（auto white balance）, 2700K, 4000K, 5000K, 6500K and 7500K
- Brightness：-255 to 255
- Saturation：0 to 255
- Sharpness：3 to 6
- Constrast：0 to 255
- Summary of live-streaming function：
- General setting:
- There are two types of live-streaming: network push flow and HDMI signal output.
- Users choosing Network Push Flow can select Build-in server to push flow to the camera’s address “rtmp://Camera IP/live/live”, or select Custom RTMP Server with filled-in third-party’s live-streaming address to create live-streaming via outer network. Platforms such as YouTube has supported providing RTMP panoramic live-streaming addresses.
- In HDMI Signal Output mode, live-streaming images are output in the form of HDMI signal. Users can use the camera's HDMI Type-D interface to collect the images, which can be saved to broadcasting station or a video capture card. Specifically, in aerial mode, the camera will save 2560x1440 original video from each lens while output 1920x960 HDMI preview. It is suitable for screen preview on the image transfer of DJI drone and for scenes where video needs to be stored.
- Either in the network streaming mode or in the HDMI signal output mode, the camera can save the original videos from six lenses while live broadcast is being on. The live-streaming is actually to output the images via real-time splicing, to the maximum resolution of the live broadcast should not exceed 4K.
- For setting of exposure parameters, Auto / Manual is globally-unified Auto/ Manual exposure. If Isolated Exposure is selected, then the six lenses will respectively perform auto isolated exposure. Isolated exposure is applicable for shooting the scenes with a large brightness-darkness gap, such as shooting sunny window and indoor, or a concert with bright stage but dark auditorium.
- The user may use the Save button in the lower right corner to save the General setting of the mode into the camera's Customize. This operation is equivalent to generating a two-dimensional code of the corresponding pattern, which enables the camera to recognize the saved parameters by scanning such two-dimensional code.
Was this information helpful?
.svg)
Insta360 Trade-In
Ottieni di più dall’attrezzatura che non usi.
Persaperne di più
Iscriviti
Ottieni le ultime notizie da Insta360
Accetto l'Informativa sulla privacy e desidero ricevere via email le ultime novità e offerte di Insta360. Sono consapevole di poter annullare l'iscrizione contattando Insta360 quando desidero.
%20(1).svg)
%20(1).svg)
.svg)
Assistenza all'acquisto
Domande pre-vendita
Ordini & Pagamento
Resi & Rimborsi
Orario d'ufficio: 9:00-18:00 (UTC+1)
Assistenza al prodotto
Risoluzione dei problemi & Assistenza
Riparazioni & Garanzia
Orario d'ufficio: 9:00-18:00 (UTC+1)
