insta360
Standalone Use
The Basics



Fold to Switch Between 180°3D/360° Modes

Hold down the release to releases the latch, allowing you to switch the EVO to 180° mode. Or fold the camera, and slide in the latch to switch it to 360° mode.
Note:Slide the latch until it clicks. When the camera is turned on, and the camera mode switcher successfully, you will here a beep sound.


Before You Start

1. Before use, please insert an exFAT format microSD card of speed class UHS-I and V30 to ensure normal recording. The maximum storage space is 128GB. For specific compatible MicroSD card modes, see What kind of microSD card can be used in EVO?
2. Before use, ensure that EVO has sufficient battery. If not, use a 5V/2A adapter to charge.


Status Indicator

Camera Status Status Indicator
Charging when camera is off
Not fully charged - solid red; Fully charged - indicator off
Charging when camera is on
Not fully charged - solid yellow; Fully charged - solid green
In standby mode (not charging)
Power > 15% - solid green; Power < 15% - solid yellow
MicroSD card not inserted
Flashing blue
Camera error
Solid red


Standalone Use

Power on / off + Reset
  • Press and hold the round button on the top of the camera for 3 seconds to turn on / off the camera;
  • Press and hold the round button on the top of the camera for 15 seconds to reset and turn off the camera.
  • Shoot
  • When the camera is on, press the round button on the top of the camera to take photos;
  • When the camera is on, press the mode button to switch the camera to Video mode, then press the round button on the top of the camera to shoot video,and press the round button again to stop shooting.
  • Note: Before shooting, make sure to slide the latch until it clicks

    insta360
    Was this information helpful?
    Yes
    No
    insta360